sidepipe
sidepipe
About
- Username
- sidepipe
- Joined
- Visits
- 25
- Last Active
- Roles
- Member
Comments
-
Yep, it appears they're down - this is a little different to the previous outages in that everything appears to be working and even their OpenResty server responds with an OK code. I sent an email to support too, so I'm sure they're aware. I've dive…
-
Actually, the kWh value for historical consumption ( today, this week and this month ) is normally also available from the smart meter. These are at nodes under 0702->0C ( "alternative historical consumption" ) at 01, 30 and 40 respecti…
-
If things are still as they were when I set mine up last year you have to get MQTT set up by support, and you'll get a different username and password. That was over a year ago now though so may have changed.
-
Would you mind sharing your domoticz script(s) as well so that I could take a look at how you've achieve this based on the average readings over the five minute period? Ok, there are a few dzvents scripts I use for this - I've put them here: https:/…
-
@arundalep I have just checked again and definately have no values for export with SMETS1 supplied by OVO. I hope you dont mind me using your code as a starting point? Credit to you for all the work you put in, thank you. I've no issues with you usi…
-
Hi Jane, If that's the case it would be interesting to know where the value comes from - it seems to me that either you must be calculating an approximation before sending from the CAD ( or prior to sending the MQTT data ) OR it's being picked up f…
-
Hi Jane, With SMETS1 meters, if they are Secure Meters, the supplier would need to turn the functionality on for us to pick up the Export Register. For SMETS2 meters - we are investigating how this works as it is early days in the new Smart Export G…
-
Hi Paul, Sadly there is no available export meter via the Glowmarkt platform (though I have been told it may come in the future dependig on permissions etc from suppliers as I understand it). Not sure what you mean here? The export meter reading is …
-
@karmacop81 I've just looked at the Bright app ( never use it ) but I can't see anywhere obvious that it shows your current meter reading, only historical usage by day/month/year. In any case, to check the value, "current" is ( or should b…
-
@karmacop81 I'm not sure which specific value you mean. The names are a little confusing ( as all a bit of a 5 minute hack to be honest! ) but if you look at the 4 "update" nodes you should be able to see that the inData array contains all…
-
@arundalep - It's a signed 24 bit value, so FFFFFF is -1, FFFFFE is -2 etc. In your case, FFF49F is 2913 ( just take the -ve of the value then and with 0xFFFFFF. ) Adam
-
Sidepipe - Adam IRL... just a bit of a data geek to be honest but into green energy where it makes sense. My EPC for the house suggests installing solar water heating at a cost of 4k-6k, for a saving of 50 quid a year. Erm, I'll pass thanks! @Greeni…
-
No problem @marrold - I see you've posted some Grafana shots in the other thread. Thought I'd share some Domoticz screenshots for my gas meter here https://bit.ly/3bREXcC for those that haven't seen it. This is completely "out of the box" …