bpeers
bpeers
About
- Username
- bpeers
- Joined
- Visits
- 18
- Last Active
- Roles
- Member
Comments
-
Hi @JaneatGlow, My Display App firmware is 1.9.1 and the Zigbee firmware is 1.2.5. My MQTT data for export is shown below and has been like this since Nov '22. "export": { "cumulative": 0, "units"…
-
Hi @JaneatGlow - my meter is a Secure Liberty 100. Its been migrated over to the DCC last year. Sorry but I don't know how to get its firmware version. If you can point me at some instructions I will post back what it is. Cheers, Brodie
-
Hi @JaneatGlow I have a SMETS1 Secure Liberty 100 meter which was working fine up until Nov 17th 2022 with regards to reporting the Export meter reading to the Hildebrand IHD\CAD whcih I then picked up via MQTT. I think my meter was adopted by the D…
-
Hi @awebb - I do this already but rely on a few things to get me there. I use the CAD to provide me real time power consumption (both what I am currently importing\ exporting). This comes in via MQTT which I use Home Assistant to read in. I have Sol…
-
Thanks Mark - I have asked Octopus to look into it and used the old email from 2021 when this issue happened so they have a previous reference point. Will let this group know how I get on. Brodie
-
Hi - I've just found this thread after I decided to look into why my own meter\ CAD \Home Assistant setup after it stopped reporting Export Data. I just thought that the reason for the data stopping in Nov was that I wasn't exporting any more. I now…
-
Hi dbrb - I have a SMETS1 meter and the Glow CAD Display with a Local MQTT interface and I too see erroneous values published. I did have a few for Gas in the early days\ weeks after I setup the CAD and then latterly I am getting erroneous export va…
-
Hi meroberts - I have a SMETS1 meter and had solar installed in Dec '20. I was able to see consumption data from the day it was installed on the Glow Stick until I changed Import\ Export tariff with my supplier (Octopus). When they swapped the tarif…
-
Hi Clive, Just a quick update. I contacted Octopus (smart@octopus.energy) and they got back to me within a day. Apparently they too stopped receiving data on the evening of the 21st and this was down to a incorrect tariff being applied (apparently j…
-
Thanks Clive. I have emailed Octopus and will hope for a response. Cheers, Brodie
-
Hi Clive, Thanks for the quick response. Yes, Octopus is showing export readings on their web dashboard so they are getting the data they need. I store the data from MQTT in a database and can see that the last reported value was at 17.22 on the 21…
-
Hi @jklondon - I had the same issue and I ended up creating 2 sensors with the config below. No doubt it could be converted into one but this works for me. Hope its helps if you still haven't sorted it. - platform: mqtt name: " Raw Instant …