KS_Eric
KS_Eric
About
- Username
- KS_Eric
- Joined
- Visits
- 80
- Last Active
- Roles
- Member
Comments
-
Seems to be back to normal now
-
Both versions of Bright app are displaying the current consumption/export position from the 'Home' tab but 'Electricity' tab is unresponsive. My set of Python scripts to log meter readings working quite normally.
-
My Bright app still seems to be working.
-
Update from support :- We had a firewall issue between 0413 and 0900 this morning that has since been resolved. Apologies for the inconvenience but be assured all is now working as expected. Kind regards, Amity Wilson
-
All working again at 9:15am
-
I was hoping to have heard from support by now. Decided to go ahead and re-run the set up wifi procedure. Just as much pain as ever but I did finally see the message “Success : you’ve connected stick to internet. Make sure all lights are green. Th…
-
Working again now
-
I'm still struggling ! Jane has given me a link to some 'handy hints' but that list doesn't include what sort of security protocol the stick expects me to use. If no protocol is selected, it won't ask for a password at all so there's a choice betwe…
-
Thanks Jane
-
I have tried to raise a support ticket but the support page doesn't seem to recognise my password and hasn't sent me a 'token' to allow me to 'change' it (back to the one I've always used !)
-
At approx 3:30 BST my glowstick was showing a red light and my 3:30 meter reading had been missed. No real problem - my 3pm reading had been received OK and I'd noticed the red light, rebooted stick and set up a manual meter reading for 3:35 (when …
-
Thanks Jane, I don't often rely on the laptop buy away from home this week and just realised that I hadn't added Bright to my list of regularly used urls. &BTW "a customer" who recommended Bluestacks was me - but that's not on my lapt…
-
I imagine this issue was the reason why the app was claiming that my Glowstick "had no internet" - even though all 3 lights on it were green. It wasn't working Monday evening or Tuesday when I left home but seemed to recover during the d…
-
I collect half-hourly electricity meter readings via Python & MQTT then save them in a database. There are no gaps in my table since midnight last night.
-
The problems I reported on this page still recur sporadically. MQTT less affected than the Bright app but not working normally. I have emailed 'support@glowmarkt.com' to raise a ticket.
-
Something odd happened last night. The PC version of the Bright app (https://bright.glowmarkt.com/dashboard) had several instances of claiming the Glowstick was offline and indeed the app on my mobile phone was saying the same. Some of the time the…
-
I have been making a Python MQTT request every 30 mins for almost two years. They usually get moved +/- 5 secs or so anyway without even trying. Not sure how to do it with the API (or even why anyone might prefer that to MQTT). Apart from last few…
-
11:29:57 i.e. 3 secs early 12:00:08 i.e. 8 secs late 12:29:56 i.e. 4 secs early Nothing too dreadful there but timings are usually all in same direction and within a few secs of the true half hour At a guess, the 12:00 attempt took longer th…
-
I managed one at 10:27:55 (just to check it was working) using my PC then using my old mob :- 10:29:56 11:00:27 I usually aim for getting a meter reading on the half hour. 4 secs early at 10:30 is fairly normal; 27secs late at 11:00 was unusual (…
-
My Python script wasn't working a few mins ago (hence posting on the 'Outage' thread) but seems to have recovered now.
-
Not sure why trying to quote failed ! @janeatGlow posted :- (3/2) FURTHER UPDATE For our customers with a CAD, Bright, our APIs and MQTT have been restored but response times may still be a bit slower than usual. For people who don't have our CAD an…
-
You might even find that people would be willing to pay extra for local access.
-
(as explained above) MQTT still not working for me ! But I'm not seeing the app either - or the webpage version. Or to be more precise, both versions load OK but home page doesn't show anything.
-
My Glowstick is showing 3 green lights so presumably working OK. But some sort of server problem (DOS again ?) means that I'm getting no data from it. Local access would solve this at a stroke !
-
Not sure exactly when my app or the webpage version stopped working but I noticed its absence from 2pm Tues (Feb 1st) MQTT worked OK at 10am Tues but not since (except that my Python script seems to be trying to connect then re-processing an old pay…
-
I run Python on an old mobile phone using a script that calls MQTT every half hour and stores results in a MySQL database. I get the occasional glitch whereby full datafile isn't downloaded a couple of times a week but otherwise, system has run we…
-
Here's the latest JSON string but 'prettied up' and with MPAN & meter serial number removed :- { elecMtr: { 0702: { 03: { 01: "000001", 05: "43", 04: "9B", 02: "0003E8", 07: "(My MPAN)", 08: &q…
-
I'm now able to get my meter readings with MQTT but rather disappointed to see that rather than the 3 decimal places that Octopus seem to offer (but not till following day) I'm only seeing the first decimal place plus a 0 or 5 in second and third is…
-
I've asked about reading the export register with MQTT but I think you can only do that if you're on an export tariff and meter has been programmed to provide that reading. Certainly my JSON string doesn't have a block labelled ["elecMtr"…
-
I've pretty well accomplished what I set out to do with a suite of two python files , one php file and one batch file run from Task Scheduler. I can download the JSON payload with a script I call GetMeterReading.py which collects the JSON payload …