ianfretwell
ianfretwell
About
- Username
- ianfretwell
- Joined
- Visits
- 184
- Last Active
- Roles
- Member
Comments
-
Or even just:- https://homebrew.n3rgy.com/ and that way you don't get Martin's details!
-
Hi - @gedger They appear to be:- Firmware:- 0314BA10 Software:- 06A33757F So the firmware version does appear to be newer than the versions mentioned in earlier posts?
-
So I last posted in Feb '23 saying that mine had never worked (EDMI ES-10B) - I have only just realised today that it has started reporting export. Appears to have started at 2am on Dec 10th '23....no idea whether Eon-Next did something or whether y…
-
You must have missed the memo... https://shop.glowmarkt.com/products/sensors?
-
Hi Jane... Mine is an EDMI ES-10B https://www.edmi-meters.com/europe/product/meters/electricity-metering-devices/es-10b/ Thanks, Ian
-
They probably would if you emailed the support address rather than posting again and again on a users forum... support@glowmarkt.com
-
Well, I've a SMETS2 meter - no sign of export ever having worked - other than on the meter's own display. So I'm not sure that's quite correct.
-
The IHD is paired to the meter - the supplier is irrelevant. So change away... Another way of looking at it is the fact that no new supplier will give you a new IHD - you are expected to carry on with the one you already have.
-
Absolutely possible - but only if your supplier actually bothers to upload that data to the DCC - and it seems most don't... So if it's not working but everything else is you're probably stuck with it.
-
My tariffs have also corrected themselves on Sat 7th - despite 3 Eon-Next support agents telling me there was nothing wrong in the first place. Interestingly, looking back, it looks like after it went wrong on Nov 24th it was actually correct again …
-
Unfortunately it's never that easy with Eon-Next - basically they're not interested because from their point of view:- "On our side your meters are set up correctly and sending the correct information every month." And they are correct b…
-
I'm definitely not grasping what's happening then... If Bright is the only thing that's incorrect - where is it getting it's figures from? Like I said, everywhere else is correct - the meter itself (so despite what you've put above this cannot be w…
-
Thanks Jane.... But in my case the only thing that looks wrong is Bright itself - everything else is correct. Bright is showing my December electricity cost as -£81(ish) whereas the CAD was fine. So to me that looks like the supplier end is fine a…
-
It's not just Shell...I'm with Eon-Next and my electric tariff has also gone negative on Nov 24th (I think). Currently Bright is showing a unit rate of -32.516 p/kWh and a standing charge of -15.996 p/day Just uploaded some manual readings for the …
-
Maybe try turning the iBoost off entirely just to ensure that it's not redirecting EVERYTHING that you're generating - i.e. you'd never look like you were exporting anyway if that was the case. I can see export happening on both the IHD and in the B…
-
As many or as few (like 0) as you like!
-
Same for many of us I'm afraid. I think this is under the control of the provider i.e. if they don't care what you're exporting because you have a FiT agreement rather than SEG -then they don't bother enabling the export figures for upload to thems…
-
Thanks for that - bit disappointing that it hasn't been pointed out in the various threads that have been asking for local access (and by that I could mean both that there's a device that can do it, and an existing device that can't!)
-
Well that's the most disheartening comment I've seen about this topic in ages! Pay more - get less!
-
Yep, definitely a bit flaky for the last 24 hours at least - just little drops, nothing major but visible against both MQTT and API connectivity.
-
and it's back... ...spoke too soon! I'll wait for Jane to tell us it's sorted before saying anything else!
-
Yes, stopped around 9.21... In fact I think it was off from 2am until 4.45am too.
-
I think that's just the CAD version, the full IHD has been out a while. I think it's just stock that there's an issue with.
-
Yep, install this into HA:- https://github.com/HandyHat/ha-hildebrandglow-dcc "as I'm waiting for that too launch." - sorry?, it's been available for ages... https://shop.glowmarkt.com/products/display-and-cad-combined-for-smart-meter-cu…
-
Just to add to that - and in case it would help cases like mine... I have solar, SMETS2 meters (which shows an export figure) & the Glowmarkt IHD, However, I've had the panels for over 7 years now so I'm on the FiT payments and not SEG - theref…
-
Oh! - Export would be very nice too - no complaints about that here. Thanks for the update
-
Hmm, no sign of MQTT data for me (and can't connect via MQTT Explorer either). Bright is back up but is telling me that the "Glow Display does not have Internet" connection (but it hasn't been touched and - as you can tell - the internet i…
-
I suppose this scenario plays nicely into the request 'benf' made just recently about being able to get the MQTT data directly from the IHD rather from the central servers :- "I was considering getting an Glow IHD for use with my SMETS2 meter a…
-
@barneyd:- Are you by chance an ex-npower customer that's been transferred to Eon-Next ? I only ask because that's my position and I too don't get any export values provided through MQTT (other than '0' - but I can read export directly from the dis…