Daily/Weekly/Monthly Consumption Issues from MQTT

When I look at the Daily, Weekly and Monthly Consumption values that I get from my Smart Meter via MQTT from the Glow IHD/CAD there is strange behaviour between 00:00 and 01:00.

Is anyone else able to look at these values? How does your data/ Smart Meter compare?

The Daily Consumption resets at 1am - that may just be summertime? (But my supplier definitely works my smart meter tariff from midnight 'local')

Daily: https://drive.google.com/file/d/1OqFgC4I2HOZgteB0ic5T0WJ27wWv7amB

My weekly and month resets have a bigger problem in that at midnight they drop to a smaller value, then increase (as we use power) till 1am when they are reset to zero

Weekly: https://drive.google.com/file/d/19_cKD9tpT6knJjVKlTlygcGL3BOhAu--

Monthly: https://drive.google.com/file/d/1RiXCIbL9tKjmPomkMWPxBRZ4Uuj3Hfna

My other issue is that my tarif changes five minutes late:

Tariff: https://drive.google.com/file/d/1tpfSB3lUeY9Ccm5EwcB3PeKoPQoiIFVK/view?usp=sharing

Comments

  • edited October 2022

    My tariff change is 8 minutes adrift, I think it only has to be be accurate to +/- 15 minutes but not 100% sure.

  • edited October 2022

    So I have done some detailed digging here and have now read the SMETS2 meter spec....yawn! Each meter has a randomised factor added to when it switches tariffs, from 0 to 30 minutes. I can't determine for how long this is fixed so all I can say is.

    This is normal.

    The delay could be up to 30 minutes.

    There is no advance, only delay.

    It may change in the future...

Sign In or Register to comment.