Geoffers
Geoffers
About
- Username
- Geoffers
- Joined
- Visits
- 24
- Last Active
- Roles
- Member
Comments
-
@stuartb - if the Bright & supplier ½ hourly readings match (as they're both sourced from the meter via the DCC) I think the onus should be on the supplier themselves to do the maths and to compare their meter reading totals with their calculate…
-
Why?? - I guess that once your CAD is registered it should be picking 10 sec updates from the meter which it sends to the Glow cloud servers. The app will now use this live data, rather than picking up the (historic) data via the DCC. But if there …
-
I think you'll find that it's probably a GMT/BST issue which I don't think the app handles correctly - your data probably looked OK when you posted on Feb 7 as that was in GMT so the displayed data in Bright matched the meter-data Because the data…
-
@JerryFr 's original post of March 2024 sounds just like what I've been experiencing in my post here https://forum.glowmarkt.com/index.php?p=/discussion/492/api-virtualentity-returns-400-bad-request#latest using "Postman" (following the &q…
-
Looks like there's a correction factor for temperature and pressure of around 1.02 , which presumably agrees with your 2% discrepancy From my bill... Units Consumed (Cubic Metres) × Volume Correction (for temperature & pressure) x Calorific Valu…
-
I've downloaded the SMETS2 specification which confirms that all time stamp data recorded by the meter is corrected to UTC timing (ie GMT) The meter does show local time in the summer as BST, however applies the correction to GMT before storing the …